Water Heaters

 

Gas and Electric Water heaters Warrior – Rheem

Manufactured Home – Mobile Mome – RV Gas Water Heaters, Electric Water Heaters

 

  Standard gas water heators are available in sizes of 30 or 40 gallons and are offered with a six-year warranty.  Some of the feature benefits are listed here.

  • Non-CFC Polyurethane Foam to prevent heat loss & reduce energy costs.
  • Fused Ceramic Shield Tank for anti-corrosion protection.
  • Cast iron burner.
  • Factory-Installed Side Temperature & Pressure Relief Valve.
  • Shipped for LP applications, but may be converted to natural gas.
  • Combination Thermostat/Energy Cut-Off.
  • Anode Rod Non-Metallic, Corrosion-Free Drain Valve.
  • Tested and listed with CSA International in accordance with the latest addition of ANSI Z21.10.1 or o CSA 4.1, CEC and 1990 NAECA approved. All models are certified at 300 PSI test pressure and 150 PSI working pressure.

  Direct Vent water heators are available in 40 gallons.  These units draw their combustion air from outside the home and are often desired in Manufactured homes.  Listed below are just a few of the features.

  • Direct Vent/Enclosed Combustion.
  • 3/4″ Top Water Connections with 3/4″ Side Space Heating Connections.
  • 2″ Non-CFC Polyurethane Foam to prevent heat loss & reduce energy costs.
  • Fused Ceramic Shield Tank for anti-corrosion protection.
  • Factory-Installed Side Temperature & Pressure Relief Valve.
  • Thru-The-Wall/Thru-The Roof Venting.
  • Aluminized Steel Multi-Port Burner on long life in natural gas units. Cast iron burners for propane.
  • Anode Rod.
  • Combination Thermostat/Energy Cut-Off.
  • Non-Metallic, Corrosion-Free Drain Valve.
  • Tested and listed with CSA International in accordance with the latest addition of ANSI Z21.10.1 or .3 CSA 4.1 or 4.3, CEC and 1990 NAECA approved. Tested in accordance with proposed ANSI flammable vapor ignition test. All models are certified at 300 PSI test pressure and 150 PSI working pressure.

Click on this image to view specifications.

water heater specifications electric water heater

  General Supply offers electric water heaters manufactured by American Water heator. These water heaters come with a six year warranty and offer the following feature benefits.

Manufactured Home Electric Water heater

  • Dual Heating Elements, 4.5 KW/240 Volts (other wattages and voltages are available) for maximum efficiency.
  • Non-CFC Polyurethane Foam to prevent heat loss & reduce energy costs.
  • Fused Ceramic Shield Tank® for anti-corrosion protection o Factory Installed Side Temperature & Pressure Valve.
  • Thermostat/High Limit Control allows adjustment of water temperature while preventing overheat protection.
  • Built-In Electric Junction Box for convenient installation.
  • Non-Metallic, Corrosion-Free Drain Valve.
  • Listed to UL 174, 1990 NAECA approved, HUD approved for mobile home installation, BOCA and ASHRAE 90.1b-1992. All models are certified at 300 PSI test pressure and 150 PSI working pressure.

 

 

 

All residential electric water heaters have a fused ceramic shield lining, a tough thick durable coating of ceramic fused to the tanks interior surface at 1600°F, forming a corrosion resistant lining for years of dependable protection and use

·         Dual Heating Elements

Screw-in direct immersion, 4500 watt 240 volt heating elements for maximum dfficiency

·         Non-CFC Foam Insulation

The tank is surrounded by a thick coat of non-CFC polyurethane foam to trap heat inside the tank, saving energy.

·         T&P Valve

Conveniently located on the side of the tank to facillate piping to drain or external to the building

·         ¾” Water Connections

Side Located

·         Anode Rod

Top-mounted, heavy duty anode for added tank protection, extending the life of the tank

·         Built-In Electric Junction Box

Top-Located, convenient junction box, ready for ½” or ¾” conduit

·         Thermostat High Limit Control

Combination control allows adjustment of water temperature while providing overheat protection

·         Code Approvals

Listed to UL 174, 1987 NAECA current requirements, HUD approved for mobile home installation, BOCA and ASHRAE 90.1-1999

Warrior® Atmosperic Gas Water Heaters for Manufactured Homes

Guardian System

·         One –of-a-kind air/fuel shut off device offers double protection

·         Maintenance free-no filter to clean

·         Standard replacements parts

Environmentally Friendly Burner

·         Low NOx design for low nitrous oxide emissions

 

Standard Features

·         Side Inlet temperature and pressure relief valve

·         Factory installed temperature and pressure relief valve –side location

·         Altitude certification of to 6,000 ft. above sea level, High altitude models available

·         Exclusive Rheemglass® tank lining resists corrosion and prolongs tank life

·         Patented R-Foam® insulation process for superior heat retention

·         Piezo igniter –  easy light pilot, no matches required

·         Cold water inlet – side connection allows for quick economical hook-up

Warrior® Direct Vent Gas Water Heater for Mfd. Housing

·         No external vented door is required

·         All combustion air comes from outside the home

·         Provides maximum design freedom since it can be placed anywhere within the home

·         Ot water outlet at the top

·         Factory installed temperature and pressure relief valve – side location

·         Exclusive Rheemglass® tank lining resists corrosion and prolongs tank life

·         Field convertible controls for natural gas or LP operation

·         Meets or exceeds National Appliance

Energy Conservation Act (NAECA) requirement

·         Piezo ignitor –  easy light pilot

·         Certified for manufactured (HUD) and modular construction

·         Anode rod equalizes aggressive water action

·         Cold water inlet-side connection allows for fast economical hook-up

40 Gallon Mobile Home electric Water Heater

·         Long lasting, copper heating element ensures hot water availability

·         Single 3500 Watt Element

·         2 inches of non CFC foam insulation is environmentally friendly and reduces standby heat loss

·         Glass lined tnk and anode rod fight corrosion for long life

·         ¾” water connection size

·         Side feed water connection for easy installation

·         16.1 Gallons GPH recovery at 90 degrees F

·         Approved for use with Manufactured Homes

 

 

 

 

 

Showing 1–12 of 14 results

Showing 1–12 of 14 results